Concrete Isaacs ACT – Residential Driveways, Slabs and Finishes

Our concrete Isaacs ACT service covers residential driveways, concrete slabs and patio slabs, as well as exposed aggregate, stamped and coloured finishes. We come to your property and carry out the work on site. For a free quote, call (02) 6130 0783 or fill in the quote form.

Get a Free Quote

Concrete Driveways, Slabs and Patios for Isaacs Homes

New concrete driveway with a broom finish

Concrete Driveways

We build new concrete driveways, replace old ones and extend existing driveways. If you are weighing up a replacement, our guide on how long a concrete driveway lasts in Canberra is a useful place to start. ACT rules also apply to the verge section of your driveway, which we cover in the next section.

Concrete Slabs and Patio Slabs

We pour concrete slabs and patio slabs for outdoor living areas and general residential use. Tell us how you plan to use the space, and we can talk through the slab you need.

ACT Driveway Rules That Apply to Isaacs Properties

Driveways in Isaacs follow the same ACT rules as driveways across the Territory. These rules cover the verge section, which is the part of the driveway between your property boundary and the road. The verge section is Territory-owned land, and it must comply with MIS 07 Driveways.

Under ACT rules, the lessee is responsible for maintaining, designing and building the driveway. You need approval to add a new driveway, change an existing driveway or add a second driveway.

We also offer driveway removal. If you plan to remove and replace a driveway, changing its location, size or layout needs approval. Replacing it with plain or asphaltic concrete does not need design approval, as long as there is no change to the original shape, size, location or surface type.

Where applicable, a standard domestic driveway on the verge section uses 32 MPa concrete.

You can check the full requirements and start an application on the ACT Government City Services driveway applications page.

Exposed aggregate concrete driveway leading to a home garage

Exposed Aggregate, Stamped and Coloured Concrete

We offer three finishes for residential concrete work: exposed aggregate concrete, stamped concrete and coloured concrete. Each can be used for driveways, patios and paths.

If your driveway crosses the verge, ACT guidance applies to the finish on that section. On the verge, coloured and stamped concrete are acceptable materials. Exposed aggregate is generally not recommended on the verge, because cement wash-off can enter the stormwater system. It may still be permitted with an Erosion and Sediment Control Management Plan.

Changing the surface type on the verge still needs approval, as set out in the ACT driveway rules above. These verge points apply only to the verge section, not to driveways, patios or paths inside your block.

To help you choose a finish, read our guide on how exposed aggregate and stamped concrete compare.

Paths, Pool Surrounds, Shed Slabs and Slab Removal

We also take on smaller residential jobs, including concrete footpaths, concrete steps and concrete pool surrounds. We pour shed slabs and garage slabs too. If an old slab needs to go first, our slab demolition service removes it before the new work starts, and we handle site preparation before a slab is poured.

Curved concrete pathway through a garden

How Our Quotes Work

Our quotes are free. Before we give you a written quote, we visit your property to look at the job. Your written quote then follows from that visit.

Driveway Questions for Isaacs Property Owners

Do I need approval to replace or change my driveway in the ACT?

Under ACT rules, you need approval for a new driveway, a changed driveway or a second driveway. The verge section is Territory land, so changing the driveway's location, size or layout also needs approval. Replacing it with plain or asphaltic concrete does not need design approval, as long as there is no change to the original shape, size, location or surface type.

Can exposed aggregate be used on the driveway verge?

Exposed aggregate is generally not recommended on the verge, because cement wash-off can enter the stormwater system. It may be permitted with an Erosion and Sediment Control Management Plan. Coloured and stamped concrete are acceptable materials on the verge.

Are there rules for steeper driveways or verge trees?

Yes. Where a block is steep, the maximum uphill gradient on the verge is 17%. Applications for driveways steeper than 10% must include three cross-sections.

Where a verge tree is present, a driveway next to a mature tree must sit outside the canopy drip line or the MIS 07 minimum clearance, whichever is greater. Works within a Tree Protection Zone need a Landscape Management and Protection Plan.

How can I check whether a builder is licensed in the ACT?

In the ACT, builders need a licence, and this includes owner-builders. Access Canberra publishes a register of licensed construction practitioners that you can search. For more tips, see our guide on what to check when choosing a concreter.

Get a Free Concrete Quote in Isaacs

Ready to talk about your driveway, slab or patio? Call (02) 6130 0783 or fill in the quote form to request a free quote. We will visit your property before we give you a written quote.

Isaacs is part of the Woden Valley district. You can also learn more about our concrete services across Canberra.